Breaker Panel

Breaker Panel

Every 7 Brew location has a breaker panel (also known as an electronics panel/box) containing the breaker switch for each supplied circuit. In the event of an Unexpected Espresso Machine Shut Off. Locating and understanding the breaker switche(s) located on the panel will help with diagnosing equipment faults.


The illustrations in this guide may be visually different than what is on site.

Warning
Caution! When troubleshooting or servicing coffee equipment. Always be sure to follow safety guidelines, training protocols, and be aware of your surroundings. Improper use, care, or service can lead to equipment damage, personal injury, or death. For technical support, contact Black Rabbit Service. Review the Manufacturer User Manuals for supplemental Safety Information.

Breaker Panel
Image below depicts a standard 7 Brew breaker panel.

Each espresso machine is identified by their corresponding workstation table:
  1. Front Table Circuit
  2. Small Table Circuit
  3. Large Table Circuit
Idea
Tech Tip! Breaker panel is organized using Circuit # (Number). Identified by their respective Circuit Name located on the chart. Each piece of equipment on site has an associated Circuit Name & Number.  Locate Circuit Name & Number on chart when isolating a tripped breaker switch!

Always verify labeling scheme prior to troubleshooting!

The illustrations in this guide may be visually different than what is on site.
  1. Secure door latch when closing panel!

Breaker Switch


Idea
Breaker Switch Characteristics:
The illustrations in this guide may be visually different than what is on site.
  1. Labeled ON / OFF indicators printed or embossed on switch.
  2. Single armed 'lever' switch with AMP rating indicator.
    1. Each espresso machine station is on a 50a breaker!
  3. Organized numerically with corresponding equipment.
    1. See section above.
Observe ON / OFF indicators located on the switch to be certain the correct actions are being taken.


The illustrations in this guide may be visually different than what is on site.
  1. Lever arm has a slight resistance when activating. 
Alert
If breaker switch does not switch between the OFF & ON positions or does not provide power to the espresso machine. Contact support!